How to Protect Solar Inverter Battery .Design Note 28


Hybrid-Solar-Charger-Circui
One of the main problems in Solar Inverter system is poor charging of Battery during rainy seasons and in cloudy days. The high current Tubular battery requires more than 1 Ampere current for proper charging. To solve this problem, I have designed a” Hybrid Solar charger” and the circuit was published in Electronics for You magazine September 2013 issue. So the charger has two sides. One side gets power from Solar panel and the other side from a Step-down transformer. If the voltage from Solar panel reduces below 9 volts, the charger shifts to AC mode and battery charges via the current from transformer.
Continue reading “How to Protect Solar Inverter Battery .Design Note 28”

Solar Power for Lighting. Design Note 27


Solar panelYou can use a Solar panel to power electrical appliances directly during day time if the Sunlight is very good, direct and continuous. So you have to install a Solar panel in a well lit area over the roof top in the East- West direction with a slight angle facing the Solar panel to the sky. So when the solar panel gets sunlight, it generates voltage and current which flows through the cables connected to it. You can have two options. The current can be stored in a battery to power the appliances at night through an Inverter or you can directly use the solar power using an Inverter without battery. Solar power is DC voltage and the Inverter converts this DC into AC to power the AC appliances. So let us see the requirements.
Continue reading “Solar Power for Lighting. Design Note 27”