Articles, Circuit, Components, Design, Electronics, Electronics Theory, Hobby Circuits, Home Circuits, How components work, Techniques, Utility Gadgets

LPG Sensor Module. Component Guide 3


mq6-gas-sensor-module2LPG Sensor modules are available now at low cost and we can use it in the Kitchen as a Gas leakage Alarm. The Module has a MQ6 Gas sensor, an Op-Amp as comparator and a preset for adjusting the sensitivity. All we need is a load resistor at the output to connect with the alarm circuit. Module is very sensitive to LPG (Liquefied Petroleum Gas) which contains Propane and Butane. The MQ6 sensor detects the gas concentration between 200 to 10,000 ppm.
Continue reading “LPG Sensor Module. Component Guide 3”

Advertisements
Animal Life, Circuit, Components, Design, Electronics, Electronics Theory, Environment, Hobby, Hobby Circuits, Home Circuits, How components work, Human life, Power Supply, Techniques, Utility Gadgets

PIR Sensor Module. Component Guide 2


PIR-2 PIR Sensor Module is one of the new introductions in electronics which is a highly useful device to switch on lights when it detects a human movement. It turns on the lights from 30 seconds to 3 minutes depending on the preset adjustments. Its range can be as high as ten meters which can also be adjusted. The module gives a high output when it detects the human movement. This high output can be used to drive a relay through a switching transistor. Let us see the details of PIR sensor module.
Continue reading “PIR Sensor Module. Component Guide 2”

Circuit, Components, Electronics, Electronics Theory, Hobby, Hobby Circuits, How components work, Techniques

Trimpots. Component guide 1


MINIATURE-TRIMPOT Potentionmeters are manually adjustable variable resistors with three terminals. Two terminals are connected to the ends of the resistive element, while the third terminal is connected to a sliding contact called Wiper.So by rotating the wiper, the resistance of the Potentiometer can be adjusted to its maximum value. The position of the wiper determines the output voltage of the Potentiometer.Potentiometer is commonly called as “Pot meter” or simply “Pot”. “Log ( Logarithmic ) Pots” are used as volume control and “Lin ( Linear ) Pots” are used for other applications.Different materials are used as resistive material in Pots. This may be Carbon, Cermet, Wire wound, Conductive plastic or metal film. Usually, the value of the Pot is printed on its body. But the miniature “Trimpots” have codes to represent its value. For example, 102 (1K), 103 (10K), 104 (100K), 105 (1M) etc. Checkout the different types of Potentiometers.
Continue reading “Trimpots. Component guide 1”