How to connect Digital Volt Ampere Meter

How  to connect Digital Volt Ampere Meter
Digital Volt Ampere meters are now available to measure DC voltage and Current. It can be connected to the output of the Power supply. So the output voltage and current to the load is displayed in the meter. If a battery is connected to the power supply for charging, we can see the current consuming by the battery during charging. When the battery is fully charged, current drops to zero which indicates the termination of charging. If project is connected, the voltage and current to the project is displayed.

Digital Volt Ampere Meter
It is a Dual Meter that displays both voltage and current digitally. It cost only Rs.300-400.
Wires of Volt Ampere Meter
1. Small Red and Small Black wires – Power for the Meter
2. Large Red wire – Positive of the Meter
3. Large Black wire – Negative of the Meter
4. Large Blue / Yellow / White wire – Current measurement

Sometimes the thickness of wire may vary. Anyway two set wire and three set wire are present in all meters.

Connect the Meter to the Power supply and take output wires as shown in the diagram below


Add your Comments here and Click Post Comment. For Queries, come to the Discuss and Share Forum

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s