Battery Charge Indicator. Simple Design 5

BATTERY-CHARGE-INDICATOR-2This is one simple but highly useful circuit for you. Most of us use different types of Rechargeable batteries in Portable devices, Inverter, Emergency lamp etc. If the battery is deeply discharged, sometimes it will not get fully charged later. This is the most common reason for the failure of Emergency lamp. So we need an indicator to show the safe level of battery voltage. It is too simple to make it and needs only three components. Just hook up it in the battery and it will remind you when it needs charge.
Continue reading “Battery Charge Indicator. Simple Design 5”


Car Battery Monitor. Beginner’s Trial 14

Monitor your Car battery or Inverter battery with this simple circuit. It always follows the terminal voltage of the battery and gives corresponding LED indications. A 12 volt Lead-Acid battery attains 13.85 volts in full charged condition and Inverter Tubular battery 14.85 volts. So it is necessary to have an idea about the charge status of the battery. If the battery discharges below 10 volts, it needs immediate charging to prevent the deep discharge. The circuit gives three LED indications. If the terminal voltage of the battery rises above 13.5 volts, Red LED lights. If the voltage drops below 10 volts, Green LED lights. If the voltage is normal around 12 volts, both the LEDs remain off.

Continue reading “Car Battery Monitor. Beginner’s Trial 14”