Battery, Circuit, Components, Design, Electronics, Electronics Theory, Home Circuits, How components work, Power Supply, Solar Circuits, Techniques, Utility Gadgets

Dual Mode Inverter Battery Charger

Here is a dual charger for Inverter battery. It can charge the battery via Solar panel as well as from AC power to keep the battery always in top condition. Even though a 12 volt Solar panel gives around 20 volts in full sunlight, it is available only three or four hours in a day. During the remaining hours, the intensity of light is very low and the condition worsens in cloudy and rainy days. This results in incomplete battery charging that ultimately leads to memory effect and permanent damage of the battery. This charger shifts the charging to AC mode when the voltage from solar panel reduces below 12 volts and restores the solar charging when the sunlight is sufficient enough again.

Continue reading “Dual Mode Inverter Battery Charger”

Battery, Circuit, Components, Design, Electronics, Electronics Theory, How components work, Power Supply, Techniques, Utility Gadgets

High Current Battery Charger. Design Trick 10

Lead Acid and Tubular battery sometimes require boost charging with high current to remove the memory effect. In Inverter battery, the charger delivers low current since the charger is always on to charge the battery. If the line voltage is low, the charging will not be complete and battery gets only partial charge. This leads to memory effect and the battery remembers this partial charge as full charge in the subsequent charging. The best method to remove the memory effect is boost charging with high current for a short period. It is better to boost charge the inverter battery once in a month using an external charger after removing the battery connection from the inverter. This charger will do a quick charging and is ideal for Automobile battery and Inverter battery.
Continue reading “High Current Battery Charger. Design Trick 10”