Peltier Joule Thief. Start Up Project 37


13AYou know, we can light a 1 watt LED without a battery! Peltier will give “Free Electricity” for that. When we heat the Peltier with flame, hot water or a hot object, it starts to generate current. Its voltage can be around 1.5V when the heat is above 60 degree. But this 1.5V is not sufficient to light even an ordinary LED that requires 1.8V minimum. 1 watt White LED requires 3.6V. Then how? We can add a Joule Thief circuit for that. A Joule Thief circuit is a self oscillating circuit that increases the input voltage as low as 700 mV to 4-5V. So if the Peltier is connected to a Joule Thief and heated, Joule thief will amplify the voltage to light the 1 watt LED. Let us check this.
Continue reading

Peltier Electricity. Start Up Project 36


12APeltier is the Fantastic device used to make cooling devices. When a current of more than 500 mA passes through the Peltier, its one side cools while the other side turns hot. This is due to the transfer of heat from one side of the Peltier semiconductor to the other. As the current increases above 1 Amps , the cooling effect increases and the temperature of the cold side of Peltier drops below 0 degree. But if we reverse the function of Peltier, it generates electricity. For example, if we heat one side of Peltier above 60 degree using a hot object, hot water or flame, Peltier generates around 1.6V DC and around 350mA current. Let us make one circuit of “Free energy “generation using a Peltier Module. Since the 1.5V from the Peltier is not sufficient for lighting an LED, we have to add a voltage booster to increase the Peltier voltage sufficient to light the LED. If 5 Peltier are serially connected, we can even charge our Mobile phone using a Candle flame.

Continue reading